Media Screen - AJA Ki Pro Installation And Operation Manual

66

Media Screen

Video SG (41.2): This parameter determines the video signal output from Ki Pro's internal test
signal generator. This parameter is used with parameter above (41.1) to determine the
type of video test signal output by Ki Pro.
Audio SG (41.3): This parameter determines the audio signal output from Ki Pro's internal test
signal generator (OFF, silence, or 1 kHz tone).
Gang and Master: These controls related to Gang recording using Multiple Ki Pro units are
described fully several pages earlier in this chaper under the topic "Gang Recording".
1080p Playback: This parameter defines the format applied when 1080p media is played bac k
off from storage. You can choose Playback as standard 1080p progressive frame or 1080
progessive segmented frame (regardless of what was recorded when input).
Audio Channels (2.3): This parameter selects use of either two or eight audio channels via SDI
embedded audio.
This screen offers settings for a variety of media-related functions, including formatting
storage media, type of Apple ProRes 422 encoding, and reel and clip definitions.
Ki Pro Web Interface, Media Screen
Encode Type (14.1): This parameter defines the Apple ProRes encoding method.
Play Media (15.1): This parameter determines behaviour during playback: either one clip will
play when "Play" is selected, or all clips will be played when a play is selected. See
parameter 15.1, Play Media, in Chapter 3 for greater detail and caveates.
Loop Play (15.2): This parameter turns looped playback on and off.
Format Media (16.1): This parameter is used to format the currently selected storage device.
Reel Name (17.0): The reel name is a number between 1 and 999 that determines the name of
the media as it will appear when the storage device (storage module or ExpressCard/34)
is mounted on a Mac OSX desktop.
Clip Name (17.2): This parameter determines the clip name associated with all clips generated
while using this setting. The clip name is either "Clip" or "SC" .
Clip Number (17.3): This parameter determines the clip number, from 1 to 999, that follows the
CLIP NAME, and is associated with all clips generated while using this setting.