Boot - Nexcom PEAK 887VL2 User Manual

Chapter 3: BIOS Setup

Boot

This section is used to configure the boot features.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
Boot
Quiet Boot [Disabled]
Fast Boot [Disabled]
Boot Option Priorities
Boot Option #1 [P5: HL-DT-ST DVDRAM . . .]
Boot Option #2 [P4: WDC WD5000AAKX-. . .]
CD/DVD ROM Drive BBS Priorities
Hard Drive BBS Priorities
CSM parameters
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Fast Boot
Enables or disables boot with initialization of a minimal set of devices
required to launch active boot option. Has no effect for BBS boot options.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Security Save & Exit
Enables or disables Quiet Boot
option
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CD/DVD ROM Drive BBS Priorities
Use the
CD/DVD ROM Drive
devices in this group.
Hard Drive BBS Priorities
Use the Hard Disk Drive BBS priorities options to set the order of the devices
in this group.
CSM Parameters
Parameters for OpROM execution, boot options, filter, etc.
44
BBS priorities options to set the order of the
PEAK 887VL2 User Manual