Security; Boot - Nexcom NEX 913 User Manual

Chapter 3: BIOS Setup

Security

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.

Boot

Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Boot
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset
Boot Configuration
Quiet Boot
Launch PXE ROM
FIXED BOOT ORDER Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
Boot Option #8
Boot Option #9
Boot Option #10
Boot Option #11
Boot Option #12
Boot Option #13
Boot Option #14
Boot Option #15
Boot Option #16
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Launch PXE ROM
Controls the execution of UEFI and legacy PXE OpROM.
FIXED BOOT ORDER Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
38
Security Boot Save & Exit
Enables or disables Quiet Boot
option
[Enabled]
[Do not launch]
[UEFI USB Key]
[UEFI Hard Disk]
[UEFI USB Hard Disk]
[UEFI Network]
[UEFI USB Lan]
[UEFI CD/DVD]
[UEFI USB CD/DVD]
[UEFI USB Floppy]
→←: Select Screen
[USB Key]
↑↓: Select Item
[Hard Disk]
Enter: Select
[USB Hard Disk]
+/-: Change Opt.
F1: General Help
[Network]
F2: Previous Values
[USB Lan]
F3: Optimized Defaults
[CD/DVD]
F4: Save & Exit
[USB CD/DVD]
ESC: Exit
[USB Floppy]
NEX 913 User Manual