Graphics Configuration - Nexcom PEAK 887VL2 User Manual

Chapter 3: BIOS Setup

Graphics Configuration

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display [Auto]
Primary PEG [Auto]
Primary PCIE [Auto]
Internal Graphics [Auto]
Aperture Size [256M]
DVMT Pre-Allocated [32M]
[256M]
DVMT Total Gfx Mem
Panel Power Enable [Disabled]
LCD Control
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable GFx.
Primary PEG
Select which PEG device should be the primary PEG.
Primary PCIE
Select which PCIE device should be the primary PCIE.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Internal Graphics
Keep IGD enabled based on the setup options.
Aperture Size
Select the Aperture size.
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG
for Switchable Gfx.
DVMT Pre-Allocated
Select DVMT 5.0 pre-allocated (fixed) graphics memory size used by the
internal graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphics
Device.
→←: Select Screen
↑↓: Select Item
Enter: Select
Panel Power Enable
+/-: Change Opt.
F1: General Help
Enables or disables panel power.
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
42
PEAK 887VL2 User Manual