Graphics Configuration - Nexcom NEX 885 User Manual

Chapter 3: BIOS Setup
System Agent (SA) Configuration
This section is used to configure the System Agent (SA) configuration.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
VT-d
► Graphics Configuration
► NB PCIe Configuration
► Memory Configuration
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
VT-d
Enables or disables VT-d function on MCH.

Graphics Configuration

Configures the graphic chip settings.
NB PCIe Configuration
Configures the NB PCI Express settings.
Memory Configuration
Configures the memory settings.
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
Graphics Configuration
This section is used to configure the Intel
Check to enable VT-d function
on MCH.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable GFx.
Primary PEG
Select which PEG device should be the primary PEG.
Primary PCIE
Select which PCIE device should be the primary PCIE.
46
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display [Auto]
Primary PEG [Auto]
Primary PCIE [Auto]
Internal Graphics [Auto]
Aperture Size [256M]
DVMT Pre-Allocated [32M]
DVMT Total Gfx Mem [256M]
Primary IGFX Boot Display [VBIOS Default]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
IGFX configuration.
®
Select which of IGFX/PEG/
PCI Graphics device should be
Primary Display Or select SG for
Switchable Gfx.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 885 User Manual