ABOUT THIS GUIDE
This guide provides basic instructions for the Fortus 900mc. Instructions and specifications pertain to
both the 900mc Gen 1 and Gen 2 models, unless otherwise stated. For additional information, contact
your Stratasys representative.
FORTUS 900MC PRINTER
The Fortus 900mc™ 3D Production System incorporates the latest in innovative technologies that produce
accurate and functional parts. Stratasys' Fused Deposition Modeling
parts, including internal features, that can be used to field-test form, fit, and function.
PRINTER COMPONENTS
The 900mc printer system consists of the following components.
•
Insight™ Software Package
A generic computer workstation (not sold by Stratasys)
•
•
The Fortus 900mc System
•
Modeling Material
Support Material
•
ACCESS DOORS AND PANELS
Warning: The access doors should only be removed by an authorized Stratasys
service technician.
This system has been designed to allow easy access to the most frequently accessed areas on the system. The
doors and top slide covers are highlighted in the following figure.
Oven Door
Canister Bay Door
1
®
(FDM) technology provides prototype
Top Slide Covers