Available Materials; Minimum Clearances - Stratasys Fortus 900mc Operation And Maintenance Manual

AVAILABLE MATERIALS

The Fortus 900mc system can use a variety of material types:
• ABSi model material used with SR-20 soluble support.
ABS-M30 and ABS-M30i model materials used with SR-20, SR-30, or SR-35 soluble support.
•
SR-30 is ductile and dissolves up to three times faster than SR-20.
•
• SR-35 is an alternate support material with up to 40% faster dissolve time (geometry dependent)
and longer life of soluble solution than SR-30.
• ABS-ESD7 model material used with SR-30 or SR-35 soluble support.
• UV resistant ASA model material used with SR-30 or SR-35 soluble support.
• Nylon 12 model material, which is the first semi-crystalline Fused Deposition Modeling (FDM)
thermoplastic, used with SR-110 soluble support.
Nylon 6 model material used with used with SR-110 soluble support.
•
PC-ABS model material used with SR-20 soluble support.
•
• High strength polycarbonate (PC) model material used with PC_S breakaway support or
SR-100 soluble support.
• PC-ISO model material used with PC_S breakaway support.
• ULTEM 9085 model material (resin), which is certified for use on commercial aircraft, used with
ULT_S support material.
• ULTEM 1010 model material (resin), which offers the highest heat resistance, chemical
resistance and tensile strength of any FDM thermoplastic, used with U1010S1 support material.
• Polyphenylsulfone (PPSF) model material, which s ideal for applications in caustic and high
heat environments, with PPSF_S support material.
ST130 model material, which is used for sacrificial tooling parts, used with ST130-S support
•
material.

MINIMUM CLEARANCES

Left Side Clearance
Right Side Clearance
Rear Clearance
Front Clearance
Overhead Clearance
Minimum 27.16 inches (68.0 cm)
Minimum 29.47 inches (74.8 cm)
Minimum 29.96 inches (76.1 cm)
Minimum 44.42 inches (112.8 cm)
Minimum 115.8 inches (294.1 cm)
12