System Configuration; Standard Connection - Furuno FAR-2218 Installation Manual

SYSTEM CONFIGURATION

The radar(s) must be interconnected to the following type approved sensors:
EPFS meeting the requirements of the IMO resolution MSC.112(73).
Gyrocompass (or equivalent devices) meeting the requirements of the IMO resolution A.424(XI).
SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing units having approved
LAN ports.

Standard connection

X-band (TR-UP)
Basic configuration is shown with solid line. For footnotes, see "Notes" on page vii.
(for FAR-2218(-BB)/2318, 12 kW)
Sub display
100-115/220-230 VAC
1ø, 50-60 Hz
(for de-icer)
Control Unit
RCU-014 or RCU-015
Control Unit RCU-016
100-230 VAC
100-230 VAC
VDR
(IEC61162-450 format)
100-230 VAC
(Analog RGB)
100-230 VAC
1ø, 50-60 Hz
440 VAC
1ø, 50-60 Hz
ANTENNA UNIT
XN12CF-RSB128-105
XN20CF-RSB128-105
XN24CF-RSB128-105
Monitor Unit* 3
MU-190 or
MU-231 or
MU-270W
Intelligent Hub
6
HUB-3000*
Switching HUB
7
HUB-100*
VDR
Transformer
NOTICE
ANTENNA UNIT
(for FAR-2228(-BB)/2328, 25 kW)
XN12CF-RSB128-106
XN20CF-RSB128-106
XN24CF-RSB128-106
5
Antenna Cable*
Gyrocompass*
Gyrocompass*
AIS Transponder
EPFS*
PROCESSOR
SDME (Speed log)
UNIT
RPU-025
AMS (IEC61162 format)
ECDIS
AMS (Contact)*
Sub Monitor 1 of ECDIS
Sub Monitor 2 of ECDIS
: Standard supply
: Optional or local supply
1 (AD-10 format)
1
(IEC61162 format)
2
(GPS)
4
iii