Siemens SIMOTION D410-2 Manual page 11

Example of a single-axis application
Figure 1-2
The example shows a single-axis application, consisting of a SIMOTION D410-2 (control
unit)
supplied with power via the PM340. The encoder is connected by means of DRIVE-CLiQ.
Example of a multi-axis application
Figure 1-3
SIMOTION D410-2
Manual, 02/2012
Application example with one axis
①
that is snapped directly on to the SINAMICS PM340 power module
Application example with three axes
Description
1.1 System overview
②
. The motor is
11