Error And Status Displays - Siemens SIMOTION D410-2 Manual

Operator control (hardware)

2.3 Error and status displays

2.3 Error and status displays
Arrangement of LED displays
The LED displays are located next to the CompactFlash card plug-in slot on the
SIMOTION D410-2.
Figure 2-7
Meaning of the LED displays
This table describes the LEDs and their meaning.
Table 2- 4
LED
RDY
RUN/STOP
OUT>5V
SF/BF:
Additional information
You can perform a detailed diagnosis with a PG/PC and the engineering system. For
information about diagnostics using LED displays, refer to the
Commissioning and Hardware Installation Manual.
32
LED displays
Error and status displays
Meaning
Status indicator of the SINAMICS Integrated
SIMOTION D410-2 operating states
Encoder current supply > 5 V (TTL/HTL)
Group error / bus fault
SIMOTION D410-2
SIMOTION D410-2
Manual, 02/2012