Downloading New Switch Software - Aruba 2930F 24G 4SFP Plus Installation And Getting Started Manual

Procedure
1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Global Status LED begins to fast flash orange (after approximately 5 seconds), release the Clear
button.
The switch will then complete its boot process and begin operating with its configuration restored to the factory
default settings.

Downloading new switch software

Software updates can be downloaded to the switch through several methods. For more information, see
Accessing updates on page 73.
58 Aruba 2930F Switch Series Installation and Getting Started
Guide