Downloading New Switch Software - Aruba 6000 Series Installation And Getting Started Manual

This process removes all switch configuration changes made from the factory default settings. This operation
includes, for example, configuration of VLANs, spanning tree, and trunks. Returning the configuration of these
features to their factory default settings (usually disabling them) may result in network connectivity issues.
If the switch has a valid configuration, and you are restoring the factory default settings for a reason other than
configuration problems, save the switch configuration prior to performing the factory default reset. After the
reset and resolution of the original problem, you can restore the saved configuration to the switch.
To restore the factory default configuration using the console, execute the
command from the console command prompt.

Downloading new switch software

Software updates can be downloaded to the switch through several methods. For more information, see
Support and Other
Aruba 6000 & 6100 Switch Series Installation and Getting Started Guide
Resources.
erase startup-config
37