Pin assignments
Switch end (MDI-X)
Signal
receive +
1
receive -
2
transmit +
3
transmit -
6
Straight-through twisted-pair cable for 1000 Mbps network connections
1000Base-T connections require that all four pairs or wires be connected.
Cable diagram
Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2 on connector "B".
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6 on connector "B".
Pins 4 and 5 on connector "A" must be wired as a twisted pair to pins 4 and 5 on connector "B".
Pins 7 and 8 on connector "A" must be wired as a twisted pair to pins 7 and 8 on connector "B".
70
Pins
Hub or switch port, or other MDI-X port end
Pins
Signal
6
transmit -
3
transmit +
2
receive -
1
receive +
Aruba 2930F Switch Series Installation and Getting Started
Guide