Power Supply Module - HP ProLiant ML350e Gen8 User Manual

Power supply module

Power redundancy requires the presence of two power supply modules in the system.
CAUTION: The default and redundant power supplies in the server must have the same output
power capacity. Verify that all power supplies have the same part number and label color. The
system becomes unstable and might shut down if it detects mismatched power supplies.
Label color
Blue
Orange
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To install the component:
Access the product rear panel.
1.
If necessary, remove the blank.
2.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or
power supply blank to cool before touching it.
Insert the power supply module into the power supply bay until it clicks into place.
3.
Output
460 W
750 W
Hardware options installation 76