HP ProLiant ML350e Gen8 User Manual page 72

Install the capacitor pack holders on top of the redundant hot-plug power supply assembly.
14.
Route and connect the redundant power supply, drive cage, and optical drive power cables to the
15.
system board.
Item Cables and connectors
Optical drive power cable connector
1
Processor 2 RPS backplane connector
2
Box 2 RPS backplane connector
3
2x13 RPS control cable connector
4
2x12 pin system board power cable
5
connector
2x4 pin processor 2 power cable connector P3M
6
2x4 pin processor 1 power cable connector P2
7
2x5 pin box 2 power cable connector
8
2x5 pin box 1 power cable connector
9
Connector identifier
P7, P8, P9, P10
P3
P5
N/A
P1
P5H
BP1
Hardware options installation 72