HP ProLiant ML350e Gen8 User Manual page 73

Install the redundant hot-plug power supply cage rear blank.
16.
Install the fan modules and the fan blank (on page 30).
17.
Install any full-length PCI expansion cards that were removed
18.
page 61).
If a Smart Array controller is installed, connect the capacitor pack cable to it.
19.
Install the system air baffle (on page 27).
20.
If removed, install the PCI air baffle
21.
If necessary, remove the power supply blank.
22.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
Install one or two common slot power supply modules into the redundant power supply cage
23.
supply module" on page 76).
Install the access panel (on page 25).
24.
Return the server to an upright position.
25.
Lock the front bezel (on page 23).
26.
Connect each power cord to the server.
27.
("PCI air baffle option" on page 37).
("Installing an expansion
Hardware options installation 73
board" on
("Power