Install The Access Panel - HP ProLiant ML350e Gen8 User Manual

Power down the server (on page 22).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Unlock the front bezel (on page 23).
3.
Place the server on its side.
4.
Remove the access panel:
5.
Loosen the access panel thumbscrews.
a.
Slide the access panel back.
b.
Lift the access panel away from the chassis.
c.

Install the access panel

Install the access panel:
1.
Place the access panel on the chassis, and slide it toward the front of the server.
a.
Operations 25