Memory Options - HP ProLiant ML350e Gen8 User Manual

Route the fan cable through the cable slot.
18.
Connect the fan cable to the system board, and then insert the fan.
19.
Install the system air baffle (on page 27).
20.
If removed, install the PCI air baffle
21.
Install the access panel (on page 25).
22.
Return the server to an upright position.
23.
Lock the front bezel (on page 23).
24.
Connect each power cord to the server.
25.
Connect each power cord to the power source.
26.
Power up the server (on page 22).
27.

Memory options

IMPORTANT: This server does not support mixing LRDIMMs, RDIMMs, or UDIMMs.
Attempting to mix any combination of these DIMMs can cause the server to halt during BIOS
initialization.
The memory subsystem in this server can support RDIMMs or UDIMMs:
•
UDIMMs represent the most basic type of memory module and offer lower latency in one DIMM per
channel configurations and relatively low power consumption, but are limited in capacity.
("PCI air baffle option" on page 37).
Hardware options installation 43