Do one of the following:
20.
For tower models, install the tower bezel (on page 31).
o
For rack models, install the security bezel
o
Power supply options
Hot-plug power supply module
CAUTION:
Verify that all power supplies have the same part number and label color. The system becomes
unstable and may shut down when it detects mismatched power supplies.
CAUTION:
all bays are populated with either a component or a blank.
To install the component:
Access the product rear panel.
1.
Remove the blank.
2.
WARNING:
power supply blank to cool before touching it.
All power supplies installed in the server must have the same output power capacity.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the power supply or
("Security bezel
option" on page 48).
Hardware options installation 112