Item
5
6
Front panel LEDs and buttons
Item
Description
Health LED
1
NIC status LED
2
Power On/Standby button
3
and system power LED
* To identify components in a degraded or critical state, see the Systems Insight Display LEDs
and
buttons" on page 8), check iLO/BIOS logs, and reference the server troubleshooting guide.
** Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.
Description
SFF drives (8)
Optional drive bay
Status
Solid green = Normal
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Fast-flashing red (4 Hz/cycles per sec) = Power fault*
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on sequence
Solid amber = System in standby
Off = No power present**
("Front panel LEDs
Component identification 8