Hp Redundant Power Supply Input Module - HP ProLiant ML110 Gen9 Maintenance And Service Manual

Remove the RPS bracket from the bay.
12.
To replace the component, reverse the removal procedure.

HP redundant power supply input module

WARNING:
Do not disable the power cord grounding plug. The grounding plug is an important safety
•
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
•
• Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the equipment.
WARNING:
supplies. Refer all maintenance, upgrades, and servicing to qualified personnel.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause ESD.
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Power down the server (on page 25).
1.
To reduce the risk of electric shock or damage to the equipment:
To reduce the risk of injury from electric shock hazards, do not open power
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
To prevent improper cooling and thermal damage, do not operate the server unless
Removal and replacement procedures 65