Remove the RPS backplane.
11.
Remove the RPS bracket from the bay.
12.
To replace the component, reverse the removal procedure.
HPE redundant power supply input module
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends
from the equipment.
Removal and replacement procedures 64