Mounting
4.2.3
Mounting on part-turn actuator
For mounting on part-turn actuators in accordance with VDI / VDE 3845, the following mounting
kit is available:
Fig. 12
•
Adapter (1) with spring (5).
•
Four screws M6 (4), four spring washers (3), and four shims (2) for attaching the mounting
bracket (6) to the positioner.
•
Four screws M5 (7), four spring washers (8), and four shims (9) for attaching the mounting
bracket to the actuator.
Required tools:
-
Wrench, size 10 / 13
-
Allen key, size 3
20
TZIDC-200, TZIDC-210, TZIDC-220
42/18-85-EN