Mounting On Linear Actuators - ABB TZIDC-200 Operating Instructions Manual
Electro-pneumatic positioner.
for 4 ... 20 ma two-wire technology,
hart, profibus pa, foundation fieldbus
Hide thumbs
Also See for TZIDC-200:
- Operating instruction (68 pages) ,
- Manual (44 pages) ,
- Commissioning instructions (34 pages)
Table of Contents
Advertisement
4.2.2
Mounting on linear actuators
For mounting on a linear actuator in accordance with DIN / IEC 534 (lateral mount per NAMUR)
a complete mounting kit is available, and consists of the items in the following table:
Fig. 5: Mounting kit for linear actuators
•
Lever (4) with follower pin, for stroke adjustment 10 ... 35 mm (0.39 ... 1.38 inch) or
20 ... 100 mm (0.79 ... 3.94 inch).
•
Follower guide (13) with two screws (10), spring washers (11), and clamp plates (12).
•
Mount bracket (3) with two screws (6) and two shims (5).
•
Screw (1) and shim (2) for mounting on cast iron yoke.
•
Two U-bolts (7) each with two shims (8) and two nuts (9) for mounting on columnar yoke.
Required tools:
-
Wrench, size 10 / 13
-
Allen key, size 4
42/18-85-EN
TZIDC-200, TZIDC-210, TZIDC-220
Mounting
15
Hide quick links:
Advertisement
Table of Contents
