Mounting On Rotary Actuator - ABB TZIDC-200 Operating Instruction

26 TZIDC-200, TZIDC-210, TZIDC-220 DIGITAL POSITIONER | 42/18-85-EN REV. E
... 6 Installation
... Mechanical mounting
Position of actuator bolt
The actuator bolt for moving the potentiometer lever can be
mounted permanently on the lever itself or on the valve stem.
Depending on the mounting method, when the valve moves the
actuator bolt performs either a circular or a linear movement
with reference to the center of rotation of the potentiometer
lever. Select the chosen bolt position in the HMI menu in order to
ensure optimum linearization. The default setting is actuator
bolt on lever.
1
5
1 Potentiometer lever
2 Actuator bolts
3 Valve stem
Figure 8: Actuator bolts on the lever
1
5
1 Potentiometer lever
2 Actuator bolts
3 Valve stem
Figure 9: Actuator bolts on the valve
2 3
4
M11031
4 Valve yoke
5 Positioner
2 3
4
M11032
4 Valve yoke
5 Positioner

Mounting on rotary actuator

For mounting on part-turn actuators in accordance with
VDI / VDE 3845, the following attachment kit is available:
6
Figure 10: Components of attachment kit
• Adapter with spring
1
• four M6 screws each
4
to fasten the attachment bracket
• four M5 screws , Spring washers
7
fasten the attachment bracket to the actuator
Required tools:
• Wrench, size 8 / 10
• Allen key, size 3
1
5
7
8
9
M10130-01
5
, spring washers and washers
3
to the positioner
6
and washers
8
2
3
4
2
to
9