ABB TZIDC-200 Operating Instructions Manual page 31

5. Switch to parameter 3.3 (Return to operating level) and save the new setup:
•
•
•
•
•
The new parameter setting is saved and the positioner automatically returns to the working level
and continues to run in the operating level that was active before calling up the configuration
level.
42/18-85-EN
Press and hold
Press twice briefly
° C
%
is displayed
mA
conf
Release
Press briefly to select
Press and hold till the countdown goes from 3 to 0
TZIDC-200, TZIDC-210, TZIDC-220
Commissioning
31