Sample Parameters - ABB TZIDC-200 Operating Instructions Manual
Electro-pneumatic positioner.
for 4 ... 20 ma two-wire technology,
hart, profibus pa, foundation fieldbus
Hide thumbs
Also See for TZIDC-200:
- Operating instruction (68 pages) ,
- Manual (44 pages) ,
- Commissioning instructions (34 pages)
Table of Contents
Advertisement
Commissioning
7.2.4
Sample parameters
"Change the zero position of the LCD screen from clockwise (CLOCKW) to counter-
clockwise stop (CTCLOCKW)"
Starting position: The positioner is in bus operation on the operating level
1. Switch to the configuration level:
•
•
•
•
2. Switch to parameter group 3._:
•
•
•
3. Select parameter 3.2:
•
•
•
4. Change parameter settings:
•
36
Press and hold down
Press and release
Wait for the countdown to go from 3 to 0
Release
and ,
is displayed
Press and hold down
Press and release
twice,
is displayed
Release
and
is displayed
Press and hold down
Press and release
twice,
is displayed
Release
Press and release
to select
TZIDC-200, TZIDC-210, TZIDC-220
and
simultaneously
and
simultaneously
,
42/18-85-EN
Hide quick links:
Advertisement
Table of Contents
