Operating Modes - ABB TZIDC-200 Operating Instructions Manual

Electro-pneumatic positioner. for 4 ... 20 ma two-wire technology, hart, profibus pa, foundation fieldbus
Hide thumbs Also See for TZIDC-200:
Table of Contents

Advertisement

7.1.1

Operating modes

Selection from the operating level:
Press and hold down
Press and release
Release
The position is displayed in % or as a rotation angle.
Operating mode
1.0
Control mode
with adaptation (the control parameter)
1.1
Control mode
without adaptation (the control parameter)
1.2
Manual adjustment
Adjust with
1.3
Manual adjustment
Adjust with
1) Since self-optimization in operating mode 1.0 is subject to several factors during control operation with adaptation,
incorrect adjustments could be made over an extended period.
2) Position not active
3) For high-speed mode: Press
42/18-85-EN
.
rapidly as often as required. The selected operating mode is displayed.
.
1)
1)
2)
in the operating range.
3)
or
2)
in the sensor range.
3)
or
and
simultaneously
TZIDC-200, TZIDC-210, TZIDC-220
Mode indicator
°
C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
Commissioning
Position indicator
°
C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tzidc-220Tzidc-210

Table of Contents