Motorola MVX1000 User Manual page 100

4 - 34 MVX1000 In-Car Digital Video System User Guide
• Tap Remove End to remove the current start point. The name of the button will change to Set End.
• Tap to
• Tap Set End to arm the Set End button. The Set End button will start to flash indicating that it's ready to
set the start point.
• When the slider on the timeline had reached your desired start point, tap Set End.
•
Tap
Create Incident
will display on the screen and a Retrospective Incident will be added to the Incidents screen.
To reset the end and start points, tap Reset.
To return to the Incidents Screen, tap Back and Recordings.
play the video segment.
to create an incident from the entire
video segments - Incident created successfully