Microphone Status And Speaker Audio Control - Motorola MVX1000 User Manual

4 - 20 MVX1000 In-Car Digital Video System User Guide

Microphone Status and Speaker Audio Control

The Audio tab is selected to control the sound played through the speaker of the MVX1000 LCD Control
Head.
Normally, during a patrol, audio being recorded is not being played through the speaker except, for
example, when a partner inside the vehicle monitors a conversation taking place outside the vehicle.
The screen is also used to monitor the status of microphones connected to the MVX1000.
IMPORTANT
4
Audio Screen
Figure 4-16
Table 4-6 describes the controls displayed on the Audio Screen.
Volume Tab Screen Controls
Table 4-6
No. Indication
1 Speaker
2 Microphone
3 Volume Slider
4 Microphone Status
Indicators
1
2
Tap the Speaker Button to turn On/Off sound routed from all
microphones to the speaker of the MVX1000 LCD Control Head.
Tap the A, B, C or D Button to turn On/Off sound routed from a
microphone to the speaker of the MVX1000 LCD Control Head.
The Audio setting does not affect the selection of
IMPORTANT
recording microphones, or the volume of the recorded
audio.
Use the volume slider to control the sound level routed to the speaker
of the MVX1000 LCD Control Head.
The microphone status indications display the status of each
microphone connected to the system (see
3
Description
Table 4-7).