Table of Contents
Advertisement
Tap
to create an incident from the entire
5.
Create Incident
added to the Incidents Screen.
Retrospective Mode - Retrospective Incident on the Incidents Screen
Figure 3-29
To edit the start point of the video segment before creating a Retrospective Incident:
• Tap Remove Start to remove the current start point. The name of the button will change to Set Start.
• Tap to
play the video segment.
• Tap Set Start to arm the Set Start button. The Set Start button will start to flash indicating that it's
ready to set the start point.
• When the slider on the timeline had reached your desired start point, tap Set Start.
•
Tap
Create Incident
will display on the screen.
To edit the start point of the video segment before creating an incident:
• Tap Remove End to remove the current start point. The name of the button will change to Set End.
• Tap to
play the video segment.
• Tap Set End to arm the Set End button. The Set End button will start to flash indicating that it's ready to
set the start point.
• When the slider on the timeline had reached your desired start point, tap Set End.
•
Tap
Create Incident
will display on the screen and a Retrospective Incident will be added to the Incidents screen.
To reset the end and start points, tap Reset.
To return to the Incidents Screen, tap Back and Recordings.
to create an incident from the entire
to create an incident from the entire
mDVR User Interface Application
video segments - a Retrospective Incident is
video segments - Incident created successfully
video segments - Incident created successfully
3 - 33
Advertisement
Table of Contents
