Table of Contents
Advertisement
Chapter 5 Data Transfer
This chapter explains what you need to do in order to upload recorded incidents to the back office server.
Introduction
Evidence data can be uploaded from the MVX1000 Unit to the server of the back office.
Data can be transferred by the following methods:
• Wireless connection to a Wireless Local Area Network (WLAN) using secured Wi-Fi link.
• Wired connection to a Local Area Network (LAN) using direct cable connection from a vehicle to a
back office network.
• Removable storage device by undocking the Solid-State Drive (SSD) from the vehicle and docking
it inside a docking station at the back office (future option).
Upload data by cable summary
In this method, data upload is performed by connecting the MVX1000 Unit, by CAT-5e cable, to a LAN
Wire Access Point linked to the back office.
To upload data by cable:
Log-in to the MVX1000 (see
1.
• Enter the User ID and tap Next.
• Enter Password and tap Next.
Logging-in requires permissions. Pressing "Skip login" when password is required may disable
NOTE
recording and other important DVR operations.
• Enter your Partner ID and tap Next or tap No Partner to skip.
Connect the LAN extension cable coming from the MVX1000 Unit to the connector of the cable that
2.
is connected to the LAN Wire Access Point. Upload will start automatically within a few seconds and
the following indications will be displayed on the screen:
• LAN Connected notification and icon (see
Logout from or Login to MVX1000 System on page
Network Connection Status Indications on page
9):
3-16)
Advertisement
Table of Contents
