Login; Logout - Motorola MVX1000 User Manual

•
The Power button on the MVX1000 box is pressed.
•
The Power button of the or 5 inch control head is pressed.
•
A Power on trigger is received to the auxiliary port of the MVX1000

Login

Once the boot-up process is complete, the Login screen is displayed.
When starting the MVX1000 for the first time, the system can only be accessed by a supervisor. Since
no rights have been granted, no other user can enter. So, initially after first login a supervisor has to
connect to the Local Area Network (LAN) of the back office for updating the MVX1000 system with a list
of users with login rights.
In some configurations, the MVX 1000 is set to retain the last logged-in user in its memory
IMPORTANT
when power is turned off. Keeping the last user logged-in enables the user to turn the vehicle
power on and off without repeatedly logging-in.
To login to the MVX1000 system:
Step 1. Under User ID field, enter your User ID (or type
act as a Guest user, tap the Skip Login Button on the Login screen.
Login Screen
Figure 2-2
Tapping Skip Login may disable recording, uploading and other operations based on agency
NOTE
configuration.
Step 2. Under the Password tab, enter your password (or type admin for default configuration) and tap
.
Next
Step 3. Under the Partner ID tab, enter the ID of your partner and tap
MVX1000 pops up a

Logout

To logout from the MVX1000 system:
dialog that welcomes you to the system.
Hello
for default configuration) and tap Next. To
admin
or tap
Next
Getting Started 2 - 3
to skip.
The
No Partner