Shutting Off The Control Power - Mitsubishi Electric CR750-D Instruction Manual

4Basic operations

4.3.3 Shutting OFF the control power

* Following figures are CR750 controller's switch.
Stop the program
Shut OFF the motor powe
3) Turning off operation of the controller power according to the controller type is shown below.
* CR750/CR760 controller: turn OFF a front power switch.
* CR751 controller: turn OFF the switch of the earth leakage breaker installed outside.
The control power will be shut off.
4-84 Turning the power ON and OFF
1) If the robot is operating, press the controller [STOP] switch, and stop
the robot.
STOP
2) After the robot has stopped, press the controller [SVO OFF] switch,
and turn the servo OFF.
SVO OFF