Unpacking To Installation; Confirming The Products - Mitsubishi Electric CR750-D Instruction Manual

2Unpacking to installation

2 Unpacking to installation

2.1 Confirming the products

Confirm that the parts shown in the standard configuration of the controller shown in
with the purchased product.
Users who have purchased options should refer to the separate "Standard Specifications". The primary power
supply cable and grounding cable must be prepared by the customer.
Table 2-1 ： Standard configuration
No.
CR750-D controller
1 Controller
2 Safety manual
3 CD-ROM (Instruction manual)
4 Dummy plug for T/B
5 CNUSR connector (Connector cover)
6 CNUSR connector (Plug)
7 CNUSR connector
8 Ferrite core
9 Noise filter
10 Lock cover set
11 1.6A fuse (reserves)
12 3.2A fuse (reserves)
13 4A fuse (reserves)
14 3.2A fuse (reserves)
15 Guarantee Card
CR751-D controller
1 Controller
2 Safety manual
3 CD-ROM (Instruction manual)
4
ACIN connector
5
ACIN terminal
6 Power cable (with the ACIN connector)
Note1)
7 Dummy plug for T/B
8 CNUSR connector (Connector cover)
9 CNUSR connector (Plug)
10 Ferrite core
11 1.6A fuse (reserves)
12 3.2A fuse (reserves)
13 4A fuse (reserves)
14 3.2A fuse (reserves)
15 Cover plate
16 Cable fixing plate
17 Cable clamp
18 Guarantee Card
2-6 Confirming the products
Part name
CR750-D
BFP-A8006
5F-FA01-C00
2D-DP1
10350-52Y0-008
10150-3000 PE
BU770D007G51
E04SR301334
SUP-EL20-ER6
HL-05FA
LM16
HM32
LM40
LM32
CR751-D
BFP-A8006
5F-FA01-C00
Note1)
1-179958-3
Note1)
316041-2
BU774D126G03
BU774D126G23
2F-DP1
10350-52Y0-008
10150-3000 PE
E04SR301334
LM16
HM32
LM40
LM32
BU773C012G61
BU773C011H02
AB-10N
AB-6N
Type Qty.
1 unit Stand alone type
1 copy
1 pc. Stand alone type
1 pc. Connect, when not using T/B.
1 pc.
1 pc.
3 pcs. For the CNUSR11/12/13 connector.
1 pc. For emergency stop wiring
1 pc. CE specification only.
1 pc. For locking the power switch.
2 pcs.
2 pcs.
1 pc.
1 pc. Only with a controller for the following models.
RV-13F/13FL/20F series, RH-1FHR
1 copy
1 unit Stand alone type
1 copy
1 pc. Stand alone type
1 pc.
2 pcs. Only with single-phase controller
3 pcs. Only with three-phase controller
1 pc. Only with single-phase controller. Length: 3m
1 pc. Only with three-phase controller. Length: 3m
1 pc. Connect, when not using T/B.
2 pcs.
2 pcs.
1 pc. For emergency stop wiring
2 pcs.
2 pcs.
1 pc.
1 pc. Only with a controller for the following models.
RV-13F/13FL/20F series, RH-1FHR
1 pc. For connector protection of the controller.
1 pc. For fixing the cable of the controller.
1 pc. For fixing the machine cable (CN1)
One fixing screw (M4) is attached.
4 pcs. For fixing TB cable, power supply and FG cable,
communication cable and machine cable (CN2)
Four fixing screws (M4) are attached.
1 copy
Table 2-1 are enclosed
Remarks