Maintenance And Inspection; Maintenance And Inspection Interval - Mitsubishi Electric CR750-D Instruction Manual
Industrial robot
Hide thumbs
Also See for CR750-D:
- Instruction manual (126 pages) ,
- Instruction manual (56 pages) ,
- Instruction manual (79 pages)
Table of Contents
Advertisement
5Maintenance and Inspection
5 Maintenance and Inspection
The maintenance and inspection procedures to be carried out to use the robot for a long time without trouble are
described in this chapter. The types and replacement methods of consumable parts are also explained.
5.1 Maintenance and inspection interval
Maintenance and inspection are divided into the inspections carried out daily, and the periodic inspections carry
out at set intervals. Always carry these out to prevent unforeseen trouble, to maintain the product for a long time,
and to secure safety.
(1) Inspection schedule
0 Hr
500 Hr
1000 Hr
1500 Hr
2000 Hr
Operating time
<Guideline for inspection period>
For one shift
10 Hr/day x 20 days/month x 12 months = approx. 2400 Hr
For two shifts
15 Hr/day x 20 days/month x 12 months = approx. 3600 Hr
[Caution] According to the schedule on the above, when using the double shift, you should
Fig. 5-1 ： Inspection schedule
5-104 Maintenance and inspection interval
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Monthly inspection
Yearly inspection
8 Hr/day x 20 days/month x 12 months = approx. 1800 Hr
make the inspections at half the regular intervals.
Hide quick links:
Advertisement
Table of Contents
