Selection Of Control Power Supply - Mitsubishi Electric MELDAS MDS-R Series Technical Specification And Instruction Manual

5-4 Selection of control power supply

For the control power supply of MDS-R Series, choose the stabilized power supply that satisfies the
specifications below.
(1) Power supply specification
Output voltage
Ripple
Output current
(Note)
Circuit protector
or
Protection fuse
CAUTION
5. Peripheral Devices
24VDC ±10%
200mV max.
Select the external power supply unit that satisfies the current or rush
current specification of the drive unit control power supply
specification.
If the power supply is supplied to multiple drive units, select a product
that satisfies the total of the drive units.
NFB
DC24V
Stabilized power supply
ACIN
NFB
DCOUT
1. Do not damage, apply excessive stress, place heavy things on or sandwich
the cables, as this may lead to electric shocks.
2. Separate the signal wire from the drive line/power line when wiring.
3. Do not connect or disconnect the connection cables between each unit while
the power is ON.
External power supply unit
5 - 7
Servo drive unit
MDS-R
CN22