Mitsubishi Electric CR750-D Instruction Manual page 75

■ CR751 controller
<CR751 controller>
* The controller is an example.
Fig. 2-48 ： AXMC terminal connector (CR751)
■ CR760 controller
<CR760 controller>
Non-CE marking
specification
A
CR760
POWER
!
*1) It is necessary to open the transformer box's door
when performing this connection work.
* Connection method is the same as the connection of emergency stop.
Refer to Page 37 "Fig. 2-22: External emergency stop connection
Fig.2-49 ： AXMC terminal connector (CR760)
Within 30cm
30cm以内
Ferrite core
フェライトコア
Pass twice
2回通し
CE marking specifi -
cation
*1)
Transformer box
Ferrite core (attachments)
Pass once
CNUSR2 connector
CNUSR2コネクタ
* The CNUSR2 connector is connected
by soldering. Refer to
21: Method of wiring for external
emergency stop connection (CR751
controller
View A: Inside of CR760 controller
(CR760)".
2Unpacking to installation
Page 36 "Fig. 2-
(CNUSR1/2))".
Safety unit
(R760SFT)
EMG1
Installation 2-63