Installing The Option Devices; Installing The Option Card; Cr750/Cr751 Controller - Mitsubishi Electric CR750-D Instruction Manual

3 Installing the option devices

Refer to Page 78, "4.2.1 Installing and removing the T/B"
"Standard Specifications" or each option's manual for the optional devices other than those described in this
manual.

3.1 Installing the Option Card

The installation procedure of the interface card.

(1) CR750/CR751 controller

<CR750 controller (Rear side)>
* The controller is an example.
<CR751 controller (Front side)>
* The controller is an example.
Fig. 3-1 ： Installation of the interface card (CR750/CR751 controller)
1) Turn off the power.
2) Pick the interface cover removal lever and pull up the interface cover.
3) Insert the interface card in SLOT1 or SLOT2.
Insert the card as both ends of the card may fit into the guide of slot(SLOT1 or SLOT2 showed in
4) Insert the connection connector securely to the back until the removal lever is locked with the sound.
This completes the installation of the interface card.
for installing method of T/B. Refer to the separate
Interface cover
インタフェースカバー Interface cover
インタフェースカバー
removable lever
取外しレバー
Handle
取っ手
3Installing the option devices
SLOT1
SLOT2
Connecting connector
接続コネクタ
Interface card
インタフェースカード
Removable lever (Other side)
取外しレバー
（下側）
Installing the Option Card 3-65
Fig. 3-1).