Mitsubishi Electric CR750-D Instruction Manual page 95

3) Press the [3] key of T/B and display the parameter.
<MENU>
1.FILE/EDIT
3.PARAM.
5.SET/INIT.
123
4) Input "RBSERIAL" into the name.
<PARAMETER>
DATA
(
Prev
DATA
123
5) Press the function key ([F1]) corresponding to the "data", and input the serial number of the robot arm.
<PARAMETER>
DATA
(
Prev
DATA
123
Press the [EXE] key, and fix the value with sound, and return to the parameter screen.
◇◆◇ The input of the number/character ◇◆◇
Each time the [CHARACTER] key is pressed, the number input mode and the character input mode change.
The current input mode is displayed in the center under the screen, and the display of "123" shows that the
number input mode and "ABC" is the character input mode.
For details, please refer to "INSTRUCTION MANUAL/ Detailed explanations of functions and operations" of the
separate volume.
6) Press the function key ([F1]) corresponding to the "close", and return to the menu screen.
<PARAMETER>
DATA
(XXXXXXXX
Prev
DATA
123
2.RUN
4.ORIGIN/BRK
6.ENHANCED
CLOSE
NAME( )
ELE( )
)
Next
CLOSE
NAME(RBSERIAL )
ELE( )
)
Next
CLOSE
NAME(RBSERIAL )
ELE( )
)
Next
CLOSE
<PARAMETER> NAME(
ELE( )
DATA
(
Prev Next
DATA 123
<PARAMETER> NAME(RBSERIAL
ELE( )
DATA
(
Prev Next
DATA 123
<PARAMETER> (RBSERIAL
xxxxxxx
Prev Next
DATA
123
<MENU>
1.FILE/EDIT 2.RUN
3.PARAM. 4.ORIGIN/BRK
5.SET/INIT. 6.ENHANCED
123
Turning the power ON and OFF 4-83
4Basic operations
)
)
CLOSE
)
)
CLOSE
) ( )
CLOSE
CLOSE