Rejecting Calls With Do Not Disturb (Dnd); Rejecting Calls With Dnd On All Lines - Yealink T4 Series User Manual

Yealink T4 Series IP Phones User Guide
On the T42S/T42G/T41S/T41P/T40P/T40G phones, select the desired line from the Line ID field.
3. Select Enabled or On from the Local Anony Reject (Local Anonymous Rejection) field.
4. (Optional.) Select the desired value from the Send Rejection Code field.
5. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On Code and Off Code
field.
6. Select Save.
Related Topic
Placing an Anonymous Call

Rejecting Calls with Do Not Disturb (DND)

You can enable DND to reject all incoming calls automatically when you do not want to be interrupted.
If you want to receive incoming calls from the specific numbers when DND is enabled, you can ask your system admin-
istrator to set DND Authorized Numbers.
Note
Check with your system administrator to find out if the DND feature is available on your phone.
Topics

Rejecting Calls with DND on All Lines

Rejecting Calls with DND on a Specific Line
Deactivating DND
Rejecting Calls with DND on All Lines
If there are multiple lines on the phone, you can enable DND for all lines. After activating it, the phone will reject all
incoming calls automatically.
Note
If both DND and busy forward are activated on the phone, calls will be forwarded to the configured destination number.
Before You Begin
Check with your system administrator if the DND on code or off code is required. If required, get it from your system
administrator.
Procedure
1. Navigate to Menu > Features > DND.
2. Select On from the DND Status field.
3. (Optional.) Enter the DND on code or off code respectively in the On Code or Off Code field.
4. Select Save.
The DND icon appears in the status bar. For T48S/T46S, the phone also prompts you that DND is enabled.
34