Installation; Delivery, Transportation, Positioning And Storage; Receipt Of The Ups And Visual Inspection; Unpacking - ABB PowerValue 11 RT 6 kVA User Manual

2 Installation

2.1

Delivery, Transportation, Positioning and Storage

2.1.1

Receipt of the UPS and visual inspection

Upon receiving the UPS, carefully examine the packing container and the UPS for any sign of physical
damage. In case of damage, notify immediately the carrier.
The packing container of the UPS protects it from mechanical and environmental damage. To increase its
protection, the UPS is wrapped with a plastic sheet. Preserve the packaging for later re-use.
2.1.2

Unpacking

After examining the package, open the carton box and remove the accessories.
- 1 x User manual
- 2 x UPS stands (support)
- 4 x M4 round screw (UPS stands)
- 1 x IEC Cable
- 1 x Monitoring Software CD
- 1 x 15-pin communication cable (for parallel systems)
- 1 x USB cable
Rack mounting kit (optional)
- 1 x 'L' metal slides
- 1 x 'R' metal slides
- 2 x 90º metal support ("ears")
- 6 x M4 flat screw
- 14 x M6 round screw
- 4 x M6 clip nut
- 1 x User manual
Examine the UPS for any sign of damage and ensure that the received UPS corresponds to the material
indicated in the delivery note. Notify your carrier or supplier immediately if damage is apparent.
2.1.3

Storage of UPS

If you plan to store the UPS prior to use, keep the UPS in a dry, clean and cool storage room with an ambient
temperature between (-15 °C to +60°C) and humidity of less than 95% non-condensing. If the packing
container has been removed protect the UPS from dust. Keep the UPS always in upright position and do not
drop the equipment.
2.2

Site Planning and Positioning

2.2.1

Planning before the installation

The appropriate place of installation for the unit is to be selected in such a way that the danger of damage to
the UPS is minimized and a long service life of the device is thus ensured. Please observe the following
instructions:
- Install the UPS in an indoor area.
- Leave 50cm of space on each side of the cabinet to enable cooling airflow and ensure that the circulation of
air to the ventilation slits is not obstructed.
- Avoid excessively high temperature and excessive moisture.
- Make sure that the surface is solid and flat.
04-3788_ABB_OPM_PVA11 6-10kVA-RT_EN_140423
Modifications reserved
Page 9/37 ABB