PowerValue 11 RT 10kVA
WARNING!
1. Plug the battery module cable into the UPS battery connector in the rear of the UPS as indicated in
Figure 4.
2.2.2.2 Standalone / Tower Installation
PowerValue 11 RT 6 kVA
1.
Carefully rotate the LCD control panel of 90º to the right in the UPS and in the battery modules.
2. Rotate the units to the vertical position
3. Screw the supports to the sides of the unit.
THIS TYPE OF CONNECTION MUST BE CARRIED OUT BY QUALIFIED
ELECTRICAL PERSONNEL.
CONNECT
AN APPROPRIATE BREAKER
BATTERIES.
Figure 4: Battery Module Connections
Figure 5: Display rotation
Figure 6: Support positioning
04-3788_ABB_OPM_PVA11 6-10kVA-RT_EN_140423
Modifications reserved
BETWEEN UPS
AND
Page 11/37 ABB