Operation; Control Panel; Selection Keys - ABB PowerValue 11 RT 6 kVA User Manual

3 OPERATION

This chapter describes how to operate the UPS through the LCD display.
WARNING!
The only user permitted operations are:
·
Operate the LCD display
·
Start up and shut down of the UPS of the user field (excluding the commissioning start up)
·
Operation of additional SNMP adapters and their software
3.1

Control Panel

The user-friendly control panel is composed of two parts:
·

Selection Keys

·
Power Management LCD Display (PMD)
LCD display
3.1.1 Selection Keys
The Function
Button
Power On/Off
Scroll up
Scroll down
Select / Edit
ONLY PERSONS
TECHNICIANS OF THE SUPPLIER OR HIS AUTHORIZED SERVICE
PARTNERS ARE ALLOWED TO OPERATE THE CONTROL PANEL OF
THE UPS.
ALL OTHER INTERVENTIONS ON THE UPS SYSTEM HAVE TO BE
DONE ONLY BY SERVICE TECHNICIANS OF THE SUPPLIER.
Selection
Figure 29: Control Panel
Illustration
Turn on and off the UPS or change operating-mode.
Enter/Exit the menus and scroll across the screens.
Scroll down the menu
Select and confirm settings.
04-3788_ABB_OPM_PVA11 6-10kVA-RT_EN_140423
Modifications reserved
WHICH HAVE BEEN TRAINED BY SERVICE
Page 21/37 ABB