Network Management Card (Optional); Installing A Serial Network Management Card (Optional); Monitoring Software - ABB PowerValue 11 RT 6 kVA User Manual

4.3

Network Management Card (Optional)

PowerValue 11 RT is equipped with an intelligent slot for other optional cards for remote management of the
UPS through internet / intranet. Please contact your local supplier for further information.
SNMP Card - SNMP, HTTP and monitoring capabilities through a Web browser interface.
AS400 Card - AS400 card for AS400 communication protocol.
4.3.1

Installing a Serial Network Management Card (optional)

Each UPS has a communication slot for an optional Serial Network Management (SNMP) Card. After
installing an SNMP card, an environmental monitoring probe can be connected to the UPS.
Note: The UPS does not have to be shut down before installing a communication card.
To install the Network Management Card, go through the following steps:
1. Remove the two screws that protect the communication slot of the UPS.
2. Insert the SNMP card into the communication slot.
3. Screw the SNMP card onto the slot using the screws removed in step 1.
For more information on the SNMP Cards, see the SNMP User's Manual.
4.3.2

Monitoring Software

ABB UPS can be monitored through a software that allows the user to monitor the UPS. The software
provides a remote and safe shutdown for multi-client systems in case of absence of power in the output of the
UPS.
Instructions on how to install the software are provided with the network management cards. For more
information, contact your local supplier.
04-3788_ABB_OPM_PVA11 6-10kVA-RT_EN_140423
Modifications reserved
Page 31/37 ABB