Navigation - ABB PowerValue 11 RT 6 kVA User Manual

3.4.2

Navigation

To navigate through the UPS screens, the scroll buttons are used. From the main screen, press
information on alarm, parallel system and battery.
From the main screen, press
following submenus: UPS status, event log, measurements, control, identification, settings. Figure 33 shows
details on how to navigate through the menus and submenus.
3.4.2.1 Event log
To enter this menu, press
displayed. The alarms are indicated by the corresponding illustration, event code and operating time of UPS
when the event occurred. To navigate through the events and alarms, press
3.4.2.2 Measurements
To enter this menu, press
frequency, current, load capacity, input voltage and frequency. To navigate through the measurements, press
or . To return to the last menu (event log), press
3.4.2.3 Control
From this menu, the user can control some features of the UPS. To modify the parameters, press
scroll up or down to modify the parameters. To confirm the selection, press
operations are indicated below:
Control
Buzzer mute
Single UPS turn off
Single UPS battery
test
Parallel UPS battery
test
Clear EPO status
Reset fault state
Clear event log
Restore factory
settings
for more than 1s to enter the main menu. The main menu includes the
Figure 33: Main menu tree
. In this menu, the last 50 events, alarms and faults occurred in the UPS are
. Several measurements are displayed in the menu such as output voltage,
Description
Mute the UPS sound
Turn off one UPS in a parallel system
Initiate test of the batteries of a single UPS
Initiate test of the batteries of a group of UPSs
Remove UPS from emergency power off status
Reset warning, alarming status and buzzer
Reset all the events from the log file
Recover all settings in the LCD menu and the
EPO polarity and locks the DC start-up (can be
executed only when UPS is in bypass mode)
04-3788_ABB_OPM_PVA11 6-10kVA-RT_EN_140423
Modifications reserved
for more than 1s.
Possible Values
No/Yes
No/Yes
Battery test running /
passed / failed /
interrupted / aborted
No/Yes
No/Yes
No/Yes
No/Yes
or .
for more than 1s. The possible
Default
Values
No
No
Battery not
tested
No
No
No
No
Page 25/37 ABB
or for
. Then