Slot Object - Siemens SIMATIC ET 200pro Manual

Common services for the Adapter Object
Service
code
0x0E
0x10
3.8.2

Slot Object

The following information applies to the Slot Object for the ET 200pro EtherNet/IP module.
The Slot Object provides the external configuration and monitoring interface to the I/O
module in one slot. One instance of this object exists for each available slot.
Class code
Class attributes
Number of instances 63
Instance attributes of the Slot Object
Attribute
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
Implemented for
Class
No
No
0x65
No attributes are supported for the Slot Object at the class level.
Access rule Name
Get / Set ModuleRefer-
1,2
ence
Get / Set ParameterSize
1,2
Get / Set Parameters
1,2
Get / Set ConfigByte
1,2
Get SlotStatus
Get Channel0Status
Get Channel1Status
Get Channel2Status
Get Channel3Status
Get Channel4Status
Get Channel5Status
Get Channel6Status
Get Channel7Status
The ET 200pro EtherNet/IP module
3.8 Device profile: vendor-specific objects
Instance
Yes
Yes
Data type Data value
UINT For Configuration Tool use.
USINT Number of parameter bytes required by this
slot (max. 32).
Array of Parameter bytes for this slot: array size is set
USINT by Attribute 2.
USINT Configuration byte for this slot.
USINT Slot status code (see Attribute 5 table).
USINT Channel Status code (see Attribute 6-13
table).
USINT
USINT
USINT
USINT
USINT
USINT
USINT
Service name
Get_Attribute_Single
Set_Attribute_Single
45