Assembly Object - Siemens SIMATIC ET 200pro Manual

The ET 200pro EtherNet/IP module
3.7 Device profile: supported CIP objects
3.7.2

Assembly Object

The following information applies to the Assembly Object for the ET 200pro EtherNet/IP
module.
Class code
Class attributes
Number of instances
Class attributes for Assembly Object
Attribute
ID
1
2
3
Instance attributes for Assembly Object:
Instance 101 (65
Attribute
ID
3
Instance 102 (66
Attribute
ID
3
Instance 103 (67
Attribute
ID
3
Instance 198 (C6
This instance is used to establish a connection when no outputs are to be addressed or
when inputs, which are already being used in an exclusive owner connection, are to be
interrogated. The data length of this instance is always zero.
32
0x04
1, 2, 3
4
Access Description
rule
Get Revision of this object
Get Maximum instance
Get Number of instances
): Input Assembly
hex
Access Description
rule
Get Input Data
): Output Assembly
hex
Access Description
rule
Set Output Data
): Config Assembly
hex
Access Description
rule
Get Configuration data
): Input Only
hex
Data type
UINT
UINT
UINT
Data type
ARRAY of BYTE
Data type
ARRAY of BYTE
Data type
ARRAY of BYTE
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
Default val-
ue
0x0002
0x0069
0x0004
Default
value
---
Default
value
---
Default
value
---