Installing, Mounting, And Connecting; Installing; Mounting - Siemens SIMATIC ET 200pro Manual

Installing, mounting, and connecting

4.1

Installing

Simple installation
The ET 200pro distributed I/O system is designed for simple installation. The wide range of
products available for the ET 200pro system give you many options for configuring your
application.
Installation position
The preferred installation position for the ET 200pro EtherNet/IP module is horizontal on a
vertical wall. Any other installation position is also possible.
Installing on a rack
You can preassemble your ET 200pro modules on a narrow or wide rack before you install
the rack on your site.
For details on rack installation, see the "Rack" chapter of the SIMATIC ET 200pro distributed
I/O system Operating Instructions manual. You can access the manual on the companion
disk that shipped with your product. You can also access the manual on the Siemens
Industry Online Support (https://support.automation.siemens.com/cs/?lc=en-US) website.
4.2

Mounting

The ET 200pro EtherNet/IP interface module connects the ET 200pro system with EtherNet
I/O and supplies power to the electronic modules.
Mounting details
For details on mounting the ET 200pro EtherNet/IP module and other components of the
ET 200pro system, see the "Mounting" chapter of the "SIMATIC ET 200pro distributed I/O
system Operating Instructions" manual. You can access the manual on the companion disk
that shipped with your product. You can also access the manual on the Siemens Industry
Online Support (https://support.automation.siemens.com/cs/?lc=en-US) website.
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
4
51