Technical Specifications - Siemens SIMATIC ET 200pro Manual

3.9

Technical specifications

SIMATIC interface module ET 200pro EtherNet/IP interface module: 2 EtherNet ports with
M12 connectors; up to 1 m width connectable to a maximum of 16 power, electronic, or
motor starter modules.
SUPPLY VOLTAGE
INPUT CURRENT
POWER LOSSES
ADDRESS AREA
INTERFACES
PROTOCOLS
INTERRUPTS/DIAGNOSTICS/STATUS INFORMATION
GALVANIC ISOLATION
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
Rated
Lower limit
Upper limit
From supply voltage 1L+, max.
Power loss, typ.
Addressing volume
Outputs
Inputs
Supports protocol for EtherNet/IP
Automatic detection of transmission speed
Transmission rate, max.
M12 (2 ports)
Supports protocol for EtherNet/IP
Diagnoses
Diagnostic functions
Diagnostics indication LED
Module Status, Network Status, and I/O Status
LEDs
Monitoring 24 V voltage supply ON (green)
24 VDC power LED
Connection to network P1 LINK (green)
Connection to network P2 LINK (green)
Between backplane bus and electronics
Between supply voltage and electronics
Between EtherNet and electronics
The ET 200pro EtherNet/IP module
3.9 Technical specifications
24 V
20.4 V
28.8 V
400 mA (dependent on con-
nection module, typ.
6 W
255 bytes
255 bytes
Yes
100 Mbps
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
49